41
www.encore-usa.com
Destination:
Defines the destination of the incoming packet that the rule is applied to.
Interface:
Select which interface (WAN or LAN) the rule is applied to.
IP Range Start:
Type the starting IP address that the rule is applied to.
IP Range End:
Type the ending IP address that the rule is applied to.
Protocol:
Select the protocol (TCP, UDP, or ICMP) of the rule.
Port Range:
Specify the port range.
Bottom Table
Add:
Click to add the rule profile to the table at the bottom of the screen.
Update:
Click to update a saved rule
Delete:
Select a saved rule and click “Delete” to remove the rule from the list.
Clear:
Click “Clear” to erase all saved rules
Priority Up:
Select a saved rule and click “Priority Up” to increase the priority of the
rule.
Priority Down:
Select a saved rule and click “Priority Down” to decrease the priority
of the rule.
Update Priority:
After increasing or decreasing the priority of a rule, click “Update
Priority” to save the changes.
