![background image](http://html1.mh-extra.com/html/encore/enhwi-1an4/enhwi-1an4_user-manual_2406249031.webp)
30
www.encore-usa.com
4.4 Routing
This section allows the user to setup Static or Dynamic Routing.
4.4.1 Static
Network Address:
Enter the target’s IP Address in the textbox.
Network Mask:
Enter the Subnet Mask in the textbox.
Gateway Address:
Enter the Gateway IP Address in the textbox.
Interface:
Select “LAN” or “WAN” from drop-down list.
Metric:
Enter the number of ‘hops’ in the textbox. Normally you can set the value to ‘0’.
Click the “
Add
” button to save the settings.