
ENHWI-3GN3 User’s Manual
www.encore-usa.com
31
•
LAN Tab
The LAN Tab is where LAN settings can be modified. If you are an entry level user, after hooking
up the necessary cables, try to access the internet from your computer. If you can open a
website with no problem, leave the settings as it is. If changes were made, click the
button to save the changed configurations.
LAN IP
IP address:
192.168.0.1 is the router’s LAN manufacturers default IP address (this will also be
the “Default Gateway” IP address of your LAN clients). It can be change based on
your LAN design and configurations. Typical designs don’t need to change this IP
address.
IP Subnet Mask:
255.255.255.0 specifies the Subnet Mask address for your LAN segment.
This is based on the IP address range used.
802.1d Spanning Tree:
This is disabled by default. If 802.1d Spanning Tree function is enabled,
this router will use the spanning tree protocol to prevent network loops.
DHCP Server
DHCP Server:
This can be enabled or disabled, “Enabled” by default.
Lease time:
Time leased to all IP address by the DHCP server.