System Wiring:
Wire Description:
Black: Connect this wire to a stable chassis ground. (-)
Red:
Connect this wire to 12 V + Ignition. This wire should be ON while the vehicle is in operation.
Green: Connect this wire to the Positive Left turn indicator wire. (+) when left turn indicator is activated.
Yellow: Connect this wire to the positive Right turn indicator wire. (+) when Right turn indicator is activated.
White: Connect this wire to the positive reverse light wire connection. (+) when in reverse.
Mounting the LED Indicators:
The LED Indicators should be mounted within the vehicle and as close to the side mirrors as possible. They have pre-
installed backings that can be affixed to any smooth surface. The kit also contains two metal mounting points that can
be used to mount the indicator between panels or molding should you chose to do so. Please insure that the wires for
the sensor are hidden and out of the customer’s sight. A hole can be drilled for the wires in certain custom installations.
If a hole is used, please be sure the connector will fit through the hole and is kept intact.
Testing and operation:
When the installation has been completed, the unit should be tested before delivery to the customer. Please do this in
an open area with the ignition in the ON position.
The unit should light the LED indicator when someone or something is within range of the rear sensors. When on the
right side the right indicator should light up and the same with the left. The unit will not trigger if there is anything in
the range of either of the front sensors. They are used to sense stationary object such as wall on a street or freeway and
will stop the rear sensors from triggering next to stationary object or moving objects that can be easily seen by the
driver.
