●
Port
Range:
Select the port range.
Add:
Click to add the rule profile to the table at the bottom of the screen.
Update:
Click to update information for the rule if you have selected a list item and have
made changes.
Delete:
Select a list item and click
Delete
to remove the item from the list.
New:
Click
New
to erase all fields and enter new information.
Priority Up:
Select a rule from the list and click
Priority Up
to increase the priority of the
rule.
Priority Down:
Select a rule from the list and click
Priority Down
to decrease the priority
of the rule.
Update Priority:
After increasing or decreasing the priority of a rule, click
Update
Priority
to save the changes.
3.6 Management
Management enables you to set up SNMP and Remote Management feature.
3.6.1 SNMP
This screen enables you to configure SNMP.
Enabled/Disabled:
Click to enable or disable SNMP.
System Name:
Displays the name given to the router.
System Location:
Displays the location of the router (normally, the DNS name).
System Contact:
Displays the contact information for the person responsible for the
router.
Community:
SNMP system name for exchanging SNMP community messages. The
name can be used to limit SNMP messages passing through the network. The default
name is 'public.'
Trap Receiver:
Type the name of the destination PC that will receive trap messages.
38
Содержание 108MBPS SUPER-GWIRELESS LANROUTER WITH XR
Страница 1: ...108Mbps Super G TM Wireless LAN Router with XR USER MANUAL...
Страница 5: ...2 Getting Start 2 1 Know the 108Mbps Wireless Router Ports 2...
Страница 12: ...PPPoE with a fixed IP address 9...
Страница 13: ...PPTP 10...
