Page C-2
EN-2000™ Reference Manual, Document C
C.1 Automotive EN-2000 Router Hardware
Description
See the following:
•
Section C.1.1, Front Panel of the Automotive EN-2000 Chassis
, on page 2
•
Section C.1.2, Back Panel of the Automotive EN-2000 Router
, on page 3
C.1.1 Front Panel of the Automotive EN-2000 Chassis
Figure C-1
shows the faceplate for the automotive EN-2000 without serial ports.
Figure C-1. EN-2000 Front Panel without Serial Ports
The front of the automotive EN-2000 router’s chassis without serial ports has:
- One LED for power status (PWR)
- One LED for system status (SYS)
- One LED for data activity (ACT) on the LAN port or WAN port
- LEDs to indicate cellular wireless activity (CELL) and network status (NET)
- Two RJ45 Ethernet ports (LAN and WAN)
- A slot for a SIM
- Two SMA connectors for antennas to support cellular wireless modules
- One reset switch (for default software/configuration load)
•
Figure C-2
shows the faceplate for the automotive EN-2000 with two serial
ports (an RS232 port and an RS485 port).
Figure C-2. EN-2000 Front Panel with Two Serial Ports
The front of the automotive EN-2000 router’s chassis with two serial ports has
all the ports that the chassis without serial ports has. The chassis with serial
ports also includes the following ports:
- One RS485 serial port
- One RS232 serial port
Note:
Figure C-2
shows a slot for a second SIM.
