Encom iPULSE R, Руководство пользователя

Страница: 128 / 155

USER MANUAL
ENCOM PULSE Link
© 2012-2015 Encom Wireless Data Solutions Inc. For ENCOM PULSE Link Version 2.2.6
Page 128
Poll Test Report
The poll test report area displays the results of the poll test. The following screen shot shows a
typical poll test report:
The following table describes the columns of the poll test report.
Column Name Description
State
The state column shows the current state of the poll test for the
associated radio. The following table describes the colors used:
Color State
The radio has not yet been polled.
The master radio's state is always gray, since it is not
polled (as it is actually doing the polling).
The radio has responded at least 90% of the poll
messages sent to it.
The radio has responded to at least 70%, but less than
90%, of the poll messages sent to it. The issues that are
causing the poll failures should be addressed.