Enclustra MA-PM3-C-R3, Руководство пользователя, Страница: 19 / 43

23/04/2019 19 / 43 Version 1.09
2.8.8 J1000 – mini HDMI Connector
The signals on J1000 are connected to Multi-Gigabit-Transceivers, if available on the FPGA module.
When using FPGA modules that do not support Gigabit-Transceivers, these signals can be used for
high speed differential IOs (e.g. LVDS). The signals are directly routed to the FPGA (no AC coupling)
with additional ESD protection. Some signals have alternative functions as indicated in the comments
row. VCC_5V_HDMI is provided on the connector as 5V 150mA supply voltage.
Comment Signal Connector Pin Signal Comment
GND 1 2 PCIE_PER1_P
PCIE_PER1_N 3 4 GND
PCIE_PET0_P 5 6 PCIE_PET0_N
GND 7 8 PCIE_PER0_P
PCIE_PER0_N 9 10 GND
PCIE_REFCLK_P 11 12 PCIE_REFCLK_N
GND 13 14 PCIE_WAKE# 22k pull-up
I2C_SCL, 10k pull-up PCIE_PERST# 15 16 PCIE_PRSNT I2C_SDA, 10k pull-up
PCIE_PET1_N 17 18 VCC_HDMI 5V 150mA
PCIE_PET1_P 19 - -
Table 8: J1000 – mini HDMI connector
2.8.9 J1100 – FMC LPC Connector
This connector allows extending Mars PM3 boards with Enclustra (e.g. FMC DR2 Module) or third-party
160 pin LPC FMC modules.
Comment Signal Connector Pin Signal Comment
Not connected H1 G1 GND
Not connected H2 G2 FMC_CLK1_M2C_P
GND H3 G3 FMC_CLK1_M2C_N
N
Warning
The IO pins are directly connected to the FPGA. Only apply VCC_IO compliant voltages
to the IO pins. Any other voltages may damage the FPGA as well as other devices on
the Mars PM3 Board or the installed Mars FPGA module.
Warning
The IO pins are directly connected to the FPGA. Only apply VCC_IO compliant voltages
to the IO pins. Any other voltages may damage the FPGA as well as other devices on
the Mars PM3 Board or the installed Mars FPGA module.