ASSEMBLY AND INSTALLATION INSTRUCTIONS for PR18
Enclosed you will find everything needed for the assembly
and use of your storage rack. Two people make assembly
and installation easier. The parts and hardware included are:
Hardware included:
2 – Ceiling Screw Hooks
Toggle Kit
Components included:
1 – Rolled end bar
2 – Offset Hanging Hooks
18 – Angled Pot Hooks – 72” Rack
18 – Angled Pot Hooks – 60” Rack
12 – Angled Pot Hooks – 48” Rack
6 – Angled Pot Hooks – 36” Rack
ASSEMBLY AND INSTALLATION INSTRUCTIONS
Rack Assembly
1) If your rack is plated it is best to keep the tissue on during installation to avoid fingerprinting.
2)
We recommend that you anchor your rack into the solid wood of ceiling joists or beams. Carefully measure the area where the
rack is to be hung and install the ceiling screw hooks directly into the wood joists. If it is not convenient to hang your rack
directly into wood joists you may use the new-technology DRYWALL anchors enclosed with your rack. The steel anchors are
very strong and when installed in drywall will hold 200 lbs. each. Two anchors hold about 400 lbs. Follow the instructions in
the Toggler kit.
3)
Suspend the offset hooks from the ceiling screw hooks and hang the bar from them.
4)
Evenly space the pot hooks and your cookware along the bar. Hang your heavier items from the middle portion of the rack,
between the offsets.
5)
All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack. Cleaning is
easily done with a damp cloth. Dry thoroughly after cleaning. If a touch-up is ever needed we recommend a "Pledge" like wax
product.
6)
The care and cleaning of our copper and brass units must be done with a low abrasive cleaner such as “Flitz”. Chrome racks are
best cleaned with a good quality glass cleaner like “Windex”. Our high quality plating will age & tarnish the same as solid
material. A periodic cleaning will restore your rack to its original brilliance.
It is important that your rack is assembled correctly. If the unit is assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
WARNING
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA. 98339
Phone 360-385-6100
•
Fax 360-385-6156
Содержание PR18
Страница 3: ...www enclume com...
