CWS8kd 8-Tiered Cookware Stand
–
Knock Down Version
PAGE 2
ASSEMBLY INSTRUCTIONS, continued
5) Locate the third upright, make sure the marked lower end is to the right, and then connect this upright to the
remaining two open shelf pieces with the barrel screws and bolts, as in Steps 3) and 4).
6) Locate
Shelf Set #1
, move to the far left of your rack,
and repeat steps 3)-5) to install the highest (and smallest)
shelf layer to at the top of your cookware stand.
7) Your cookware stand can now be stood up, so you have the option of finishing assembly with the stand lying
down or upright, whichever is the easiest for you and your partner to work from.
8) Repeat Steps 3 – 5 to connect the remaining
six Shelf Sets (sets 2-7)
to the three uprights.
9) Place the assembled rack upright on a level surface and using the two hex wrenches, tighten the
TOP
shelves
first, then the
BOTTOM
shelf, then square up the stand and securely tighten all barrel screws and bolts on the
remaining six shelves.
10) Apply the enclosed felt pads to the underside of the bottom tab of each of the three uprights.
.
USE INSTRUCTIONS
1) Take care to place your cookware rack on a solid, level surface in an area out of the way from foot traffic.
2) Place heavier pots on the lower shelves and avoid over-loading top shelves to create a possible top-heavy
condition and rack instability.
3) Enclume’s hammered steel racks are finished with an industrial wax which is designed to provide years of
protection to your cookware stand. Cleaning is easily done with a damp cloth, and dry thoroughly after cleaning.
If a touch-up is ever needed a commercial wax product is recommended.
It is important that your rack is assembled correctly. If assembled or used
incorrectly, it could become unstable and collapse, possibly causing injury.
Limited Warranty:
This product is warranted to be free of defects in material or workmanship for a period of five years from the
date of your purchase. Your exclusive remedy shall be the repair or replacement of the defective product, and shall be subject to the
following conditions: (1) you provide notice of any defect to Enclume within the warranty period, and (2) you return the defective
product to Enclume Design Products, Inc.( 24 Colwell St., Port Hadlock, WA 98339),
postage prepaid
within
20
days of obtaining a
return authorization number from Enclume (which may be obtained by telephoning the number at the bottom of this instructions).
There are no other warranties, expressed or implied, applicable to this product.
THERE ARE NO WARRANTIES OF MER-
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ALL
INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE PURCHASE OR USE OF THIS PRODUCT.
If you need help, please call 1-877-362-5863
Enclume Design Products, Inc.
24 Colwell Street, Port Hadlock, WA 98339
Phone 360-385-6100
Fax 360-385-6156
Warning
