![Enclume CWS8kd Скачать руководство пользователя страница 1](http://html1.mh-extra.com/html/enclume/cws8kd/cws8kd_assembly-instructions_2405915001.webp)
Enclume
8-Tier Cookware Stand
Knock Down Version
CWS8kd
Thank you for selecting Enclume.
You will not be disappointed
.
Enclume is the No. 1 brand in pot racks and
You now own one of the finest racks made.
WARNING:
READ ALL OF THESE INSTRUCTIONS BEFORE
FINISHED PRODUCT IN USE
ASSEMBLING AND USING YOUR RACK.
Enclosed you will find everything needed for the
ASSEMBLY POSITION
assembly and use of your storage rack
. Two people
At Step 6) Completion
are highly recommended for assembly
and make
this process much easier and less frustrating,
The parts and hardware included are
:
Hardware included:
24 – Barrel Bolt – #10 x 24 x 7/16”
24 – Barrel Screw – #10 x 24 x 5/16”
3 – Felt Pads
2 – 5/32” Hex Key Wrenches
Components included
:
3 – Uprights
8 – Shelf Sets (numbered 1 - 8);
Each set contains 3 shelf pieces for a total 24 pieces
ASSEMBLY INSTRUCTIONS
1)
Unpack the rack box, layout the contents, and match them to the hardware and component lists above
2) Place two of the three uprights on a firm surface with what will be the lower ends of the uprights (marked with a
small piece of masking tape)extending to your right
3) Locate
Shelf Set #8
(set of three), the largest and bottom layer of shelves. Using two of the three shelf pieces,
attach the two shelf pieces to an upright by inserting the
barrel screws and bolts
as follows:
a) First through the hole in one end of shelf piece,
b) Then through the lowest hole in the upright, and then
c) Through the hole in the other shelf.
Connect the two shelf pieces surrounding the upright by inserting a
barrel screw and bolt,
making sure the
upright is between the two shelves. You may use both hex wrenches to tighten this connection, but please
, do not
fully tighten at this time.
NOTE: You will be revisiting the process of this instruction 3) with other shelf sets.
4) Using the third shelf piece from the Shelf Set you are working with, repeat Step 3) to connect the two remaining
open shelf pieces to the second upright.
** PLEASE TURN THIS INSTRUCTION OVER **
A
ll
Three Uprights
Shelf Set #1
Shelf
Set #8
Shelf
Set #2
Shelf
Set #3
Shelf
Set #4
Shelf
Set #5
Shelf
Set #6
Shelf
Set #7