7)
Insert the "S" hooks into each of the remaining holes in the cross bar and the other end through one end of the chain.
Carefully lift your rack into place and attach the other end of the chain onto the ceiling screw hooks.
8)
Hang your heavier item on the straight portion of the rack body or the center of the grid area.
9)
All of our hammered steel racks are finished with an industrial wax designed to give years of protection to the rack.
Cleaning is done easily with a damp cloth. Dry thoroughly after cleaning. If a touch up is ever needed we recommend a
"Pledge" like wax product.
Note: Grid as shown in drawings is upside down for illustration purposes. Please turn grid over so crossbars that extend the
width of the grid are facing down. This will help to keep grid from sliding out of position when rack is in use.
Ver 05.05.03
jury.
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing in
WARNING
Limited Warranty:
This product is warranted to be free of material defects for a period of five years from the date of purchase. Customer's exclusive remedy shall
be the repair or replacement of the defective product and shall be subject to the following conditions: (1) notice of any defect is received by Enclume within the
warranty period and (2) customer returns the defective product to Enclume Design Products, Inc. , 24 Colwell St.. , Port Hadlock, WA 98339,
postage prepaid
within
20
days following a return authorization number (which may be obtained by telephoning the number at the bottom of this instructions) being provided to the
customer by Enclume. There are no other warranties, expressed or implied.
THERE ARE NO WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. ENCLUME SPECIFICALLY DISCLAIMS ANY AND ALL INCIDENTAL OR CONSEQUENTIAL DAMAGES
ARISING OUT OF THE PURCHASE OR USE OF ENCLUME'S PRODUCTS.
