3) Attach the two 5/16” eye bolts through the tops of the two Hangers and secure the bolts underneath with the
5/16” nuts.
4) Lift up each end of the Rack Body, one at a time, and hook the two Hangers onto the inside of the Rack Body.
5) Place the Grid down into to the Rack Body and slide the Hangers to position cradling the ends of the Grid.
RACK INSTALLATION
1) Mark your ceiling accurately for the two points where the two eyebolts attached to the hangers will be suspended
from the ceiling.
2) If mounting in solid wood (and it must be solid!), drill tap holes and insert the two ceiling screw hooks into the
holes you marked.
3) If mounting in sheet rock (drywall), follow the direction for installing two toggler mounts (togglers in kit) and
install the two threaded ceiling screw hooks.
4) Suspend the rack by attaching the two eyebolts on the hangers, to the ceiling screw hooks installed in your ceiling.
5) If you need to lower your rack, attach the chains to the eyebolts and hook onto the ceiling screw hooks.
5) Distribute the included pots hooks about the rack body and grid and hang your pots and utensils.
6) Finished! Enjoy your new pot rack. Remember cleaning is easy.
It is important that your rack is assembled correctly. If the unit is assembled or
used incorrectly, it could become unstable and collapse, possibly causing injury.
Warranty. This product is warranted to be free of defects in craftsmanship or material for a
period of five years from the date of purchase. Your exclusive remedy for breach of this
warranty is the repair or replacement of the defective product, when it is delivered, postage
prepaid, to Enclume Design Products, Inc. at 24 Colwell St. Port Hadlock, WA. 98339. There is
no other warranty, expressed or implied, and there is specifically NO WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. In no event will Enclume Design
Products, Inc. be responsible for any incidental or consequential damages
related to use of
this product.
