
Users’ Manual
Digital Node (Wireless-RF)
Page
|
3
2.2
Node Setup
1
Connect the node antenna to the antenna bulkhead.
2
Connect the sensor wires to the node while ensuring that the wires are plugged in correctly.
PWR: +12 V Supply
GND: Ground
SIG1: Output Signal
SIG2: If reqd
SHLD: Shield wire of sensor
3
Switch off the Node and insert the battery while ensuring the correct polarity.
2.3
Configuring via the ER Offline App
1
Obtain an Android phone and connect it to the ER_Beam Wi-Fi network. (See the Gateway section to
learn about switching on the ER_Beam Wi-Fi network)
2
Connect the Android smartphone to the Node via an OTG adapter.
NOTE:
Please make sure the Node is switch off before connecting to your Android phone.