Enbrel AutoTouch Connect, Руководство пользователя

Страница: 17 / 44

How it works.
When you push the status button to
start an injection, the AutoTouch
Connect
TM reusable autoinjector
pushes a hidden needle out of the
Enbrel Mini
® single-dose prefilled
cartridge into your skin. Then, a
plunger rod will push into Enbrel
Mini, injecting medicine into your
body. After the medicine is
injected, the rod will pull back up
and the needle will withdraw from
your skin. After a successful
injection all lights will turn off and
the door will open. The needle
stays hidden at all times during the
injection process.
What you will hear.
Needle insertion and plunger rod are
operated by motors. You will hear a
motor noise as the rod moves down
and then back up again. Whenever
you hear a motorized noise, you will
know that an injection is in
progress.
What you will see.
During the injection, the viewing
window light will be on, and the
plunger rod will move through the
window. Also during the injection,
the status light will be flashing
green, and the progress bar will
decrease. After a successful
injection, the progress bar, and
status button will turn off, and
AutoTouch Connect will open the
door.
If the status light turns red, and
beeps for more than a few seconds,
an error has occurred. Use the
troubleshooting section of this
manual to see what to do if this
happens.