ENAR PEN10B, Инструкция по эксплуатации

Страница: 25 / 28

en
•
Sliding part too worn or piston ring stuck
Faulty oil is being used
Negligence in oil replacement
Faulty or soiled air filter element
•
Stops suddenly with abnormal noise
Gearing or damage of piston or rod
•
Diluted lubricating oil, increasing its volume
Body of the injection pump piston worn
•
The engine does not stop, even when fuel supply is interrupted (or
causes overdrive)
Too much oil
Incorrect installation of control system
Injection pump frame displaced
OPERATION OF THE MACHINE
Slow transition speed and weak vibration.
Skewed movement
•
Insufficient engine power
•
The clutch slips
•
V-belt slips
•
Excessive vibrator oil
•
Internal parts of vibrator faulty
Does not advance
•
V-belt uncoupled or slips
•
Clutch slips
•
Vibrator caught
•
If it vibrates but does not move, the vibrator may be on a wet and
slippery surface. Try on the correct surface
VIBRATING PLATES
23
PEN10B-PEN13C-PEN16C-PEN16D