Version
Document Title
Release Date
08
EL2.0
–
Installation Manual
2020-03-18
EL2.0 Installation Manual
–
Rev.08 Mar 2020
28
TRANSPORT, MAINTENANCE AND RECYCLING
The EL2.0 Hydrogen Generator is designed to provide many hours of service with minimal maintenance. Proper care
and maintenance by qualified personnel will help maximize the operating life of the unit.
MAINTENANCE ROUTINE
The unit should be inspected annually for obvious signs of physical deterioration.
Hydrogen connections should be tested for leakage using a combustible gas detector.
Once a year, empty the process tank and replace the conditioning solution
–
starting from the date of
commissioning. To empty the process tank, place an appropriate container below the electrolyser. Then connect
the quick coupling connector and pipe supplied with the EL2.0 to the port W1.3 and let the conditioning solution
drain into the container. This will take 20 to 30 minutes. Then disconnect the pipe and connector and do a first fill
with new conditioning solution. Always wear appropriate PPE when handling the conditioning solution. Dispose of
the conditioning solution in compliance with local and national regulation.
CLEANING
The internal components of the device do not need to be cleaned and should not be accessed by the
user for cleaning. To clean the outside of the unit, only use a damp cloth (no detergents, acids or
aggressive or abrasive substances).
TRANSPORT
If the unit has to be transported or returned to the factory for repair, make sure that the water tank is completely
empty, close the water tank with the cap and place the protections supplied with the unit.
Important:
We will not accept the unit if returned without the original shipping boxes or equivalent
packaging for safe transport.
The unit has to be transported in an upright position and the warning label shown on the right
side should be clearly visible on the outside of the packaging.
Attention:
In winter, the shipping box has to be additionally marked with a special label
informing the shipping agent that the generator may not be exposed to temperatures below
2 °C at any time.
DISPOSAL
The EL2.0 is a cradle to cradle product, please return it to Enapter at the end of life, where we will
fully recycle the system.
By ensuring this product is disposed of correctly, you will help to prevent potential negative
consequences for the environment and human health.
