6
To switch to the Constant-On mode when it is working under timer mode, press
and hold the
key for 3 sec.
If the timer was last used before turning the power off, after turning the power
on, the LED will indicate a timer time last set.
3.2
Using the Constant-ON Mode:
3.2a
Press and hold the
Key for 3 sec. The LED display will show “ON” to
indicate the unit is in the Constant-On mode. The unit will start immediately
after “ON” is shown.
3.2b
To stop working under Constant-on mode, press the
key. The LED
display will indicate a timer time last set.
To resume Constant-On, press
key again and repeat the step 3.2a)
OR
To stop working immediately, switch the power switch to turn the power off.
To restart, switch the power switch to turn on the power.
Note:
To switch to the timer mode when it is working under Constant-on mode, press
the
key and follow the instruction 3.1.
During Constant-On Mode, the
and
keys are not functioning.
If the Constant-ON mode was last used before turning the power off, after
turning the power on, the LED will indicate “ON”. The unit will start working
after 3 sec.
WARNING: To avoid overheating when running it for an extended period of time, keep
the area around the generator free from obstructions to maximize air movement and use
an external fan if possible.
GUIDANCE FOR APPLYING OZONE TREATMENT
For any liquid treatment, place the unit at least
10cm above the liquid’s surface to prevent it
from entering the generator. For air treatment it
is recommended to run without the hose
connecting to the ozone outlet.
WARNING: Place the unit at least 10 cm
above the liquid’s surface to prevent
backflow.
Please visit
www.enaly.com
for information about additional applications and product
FAQ’s.
