Soft and sparkly!
Soft and sparkly!
Soft and sparkly!
Soft and sparkly!
Many therapists and teachers have been asking us to make a
squeezable “Gooshy Switch”. We found a durable, soft, sparkly pillow
and converted it into two switches: Gooshy Switch and a Gooshy
Switch with Lights, Vibration, and Music. The Lights, Vibration and
Music Switch has a special control which allows the user to select any
or all of the rewards. It can be used alone as a sensory device. Size:
10"L x 4½"W x 2"H. Requires 2 AA Batteries. Weight: 1¼ lb.
Operation:
Operation:
Operation:
Operation:
1.
The Gooshey Switch requires two AA batteries. The battery
compartment is located under the base of the unit. Carefully
turn the switch over, and then remove the battery cover with
a small Philips screwdriver. Install new batteries, being
careful to observe proper battery polarity. Alkaline batteries
are recommended because they last longer.
2.
Replace the battery case cover and secure it with the small
screw. Do not over-tighten.
3.
To turn on or off the desired stimuli (1-vibration; 2-music; 3-
lights), push the small white rocker switches to the on or
(open position). Open position means off. Please see Fig 1.
Figure 1.
Figure 1.
Figure 1.
Figure 1.
4.
Press anywhere on the Gooshey surface and you will be
rewarded with the selected stimuli vibration, lights & music.
5.
To operate as a switch connect an external toy or device via
the 1/8-inch cord jack on the unit. If you need to use a ¼"
adaptor, it must be a mono adaptor, not stereo. Press
anywhere on the Gooshey surface to activate your toy or
device. Once you release pressure from the switch your toy
or device will turn off.
Troubleshooting:
Troubleshooting:
Troubleshooting:
Troubleshooting:
Problem:
Problem:
Problem:
Problem: The Gooshey Switch does not operate properly.
Action # 1:
Action # 1:
Action # 1:
Action # 1: Make sure the batteries are in the battery compartment
properly, and making good contact.
Action # 2:
Action # 2:
Action # 2:
Action # 2: Make sure you have the desired stimuli selected as
explained in operation No.3.
Action # 3:
Action # 3:
Action # 3:
Action # 3: If the unit still does not work properly, replace the
batteries.
Problem:
Problem:
Problem:
Problem: The Gooshey Switch does not activate a connected
toy/device.
Action #1:
Action #1:
Action #1:
Action #1: Make sure all connections are plugged in all the way.
There should be no gaps.
Action #2:
Action #2:
Action #2:
Action #2: Check batteries in toy/device, replace if weak or dead.
Care of Unit:
Care of Unit:
Care of Unit:
Care of Unit:
The Gooshey Switch can be wiped clean with any household multi-
purpose cleaner and disinfectant.
Do not submerge
Do not submerge
Do not submerge
Do not submerge the unit, as it will damage the contents of the top
and the electrical components.
Rev 2/2/17
Rev 2/2/17
Rev 2/2/17
Rev 2/2/17
