What could be more calming than a glowing jellyfish playing
soothing ocean sounds and gentle music? Turn it on by
pressing on the edge of the jellyfish body or by using an
external capability switch (not included) and she cycles through
the colors of the rainbow while playing a 4-minute peaceful
melody. Pressing again stops the action; there is also an on/off
switch on the battery case. Beautiful ocean blue tentacles
dangle from the plush body, which has a loop for hanging
anywhere. Size: 7"L x 7"W x 8"H. Requires 3 AAA Batteries.
Weight: 1 lb.
Operation:
1. Jellyfish Soother requires 3 AAA batteries (Not included) to
operate. Use alkaline batteries only (e.g. Duracell or
Energizer brand). Do not use rechargeable batteries or any
other type of batteries because they supply lower voltage
and the unit will not perform properly. Never mix old and new
batteries together or different brands or types together.
2. The battery compartment is located on the bottom of
Jellyfish Soother, under the Velcro flap. Using a Phillips
head screwdriver open and remove the batter cover. Next
install 3 AAA batteries paying close attention to proper
battery polarity.
3. Replace the battery compartment cover and secure it with
the screw. Set the ON/OFF switch to ON.
4. Connect Jellyfish Soother to any external capability switch
(not included) via the jack located at the end of her cord.
Jellyfish Soother is equipped with a 1/8" jack for use with
external capability switches with a 1/8" plug. Make sure you
have pushed the switch plug all the way in. There should be
no gaps.
5. Actuate your external capability switch or squeeze Jellyfish
Soother s Musical Note and she cycles through the colors of
the rainbow while playing a 4-minute peaceful melody.
Each switch activation or musical Note squeeze will start or
stop Jellyfish Soother. The song will change and start from
the beginning the next time you activate her.
Troubleshooting:
Problem:
Jellyfish Soother does not function correctly.
Action #1:
Replace the batteries paying close attention to
proper battery polarity.
Action #2:
Make sure that the connection between the external
capability switch is pushed in all the way. There should be NO
gaps.
Action #3:
Try your switch with another switch operated
toy/device in an effort to rule out your switch as the source of
the problems.
Care of Unit:
If you will not be using Jellyfish Soother for an extended amount
of time, we recommend removing the batteries.
Do not submerge
the unit in water, as it will damage the
electrical components. Jellyfish Soother is surface washable
only.
Rev 3/8/2022
