Enabling Devices 2296, Руководство пользователя

Страница: 5 / 10

Test Procedure:
Before filling the Bubble Tube all the way the following test procedure should be done
for water tightness is recommended.
Fill the Bubble Tube up with about 3 cups of distilled water. Be careful not to spill water
during this process. Inspect the base for any leakage. If no water leakage is apparent
proceed to step #4. If there is water leaking from the base double check all connections
from step #2.
Note: The Bubble Column is not designed for outdoor setup. For best results place the
Bubble Column in a location that is away from direct sunlight or a bright light source.
Supply Power to the Bubble Column:
Plug the AC Wall Transformer into the base and into any standard wall outlet.
Wall Anchor:
We recommend that you use the included wall anchor to help secure the Bubble
Column for safety reasons. There are two ways the anchor can be used. One up
against a flat wall surface, or it can be used to corner mount against two walls. The
included mounting hardware is meant to be used for sheetrock/drywall. If you have
other wall surfaces such as wood or concrete block consult your building maintenance,
contractor or hardware store associate for the proper mounting hardware.
Page No.4