Bear in mind you can only be connected to one device at a time. If two of your devices have
Bear in mind you can only be connected to one device at a time. If two of your devices have
Bear in mind you can only be connected to one device at a time. If two of your devices have
Bear in mind you can only be connected to one device at a time. If two of your devices have
Bluetooth turned on, you must turn off the Bluetooth of the one you do not wish to connect
Bluetooth turned on, you must turn off the Bluetooth of the one you do not wish to connect
Bluetooth turned on, you must turn off the Bluetooth of the one you do not wish to connect
Bluetooth turned on, you must turn off the Bluetooth of the one you do not wish to connect
to while you connect to the other device. No reset is required with Open
to while you connect to the other device. No reset is required with Open
to while you connect to the other device. No reset is required with Open
to while you connect to the other device. No reset is required with Open Pairing.
Pairing.
Pairing.
Pairing.
If you connect to more than 8 devices, the next pairing will delete the earliest pairing. If you
delete or “forget” the pairing of the iPad Wireless Switch Interface on a device, restart the
Bluetooth and attempt to re-pair with the iPad Wireless Switch Interface.
To delete all pairings, or if you would like to connect to another device, or you are having
connection problems, you can pair again by removing all the existing pairing connections.
2.
First, delete the pairing from the host device (e.g. iPad) and turn off the Bluetooth.
Then, hold the power button on the iPad Wireless Switch Interface for 6 seconds. The
LEDs will turn off, but don’t release until they blink 3 more times. You are now ready to
pair again.
Switch Use
Switch Use
Switch Use
Switch Use
3.
Plug any capability switch with the standard 1/8" switch plug into Port 1-2 for single
switch app use. Some switch friendly apps support two switch use so a second switch
can be plugged into port 3-4. Make sure your switch or switches are plugged in all the
way. There should be no gaps. Always consult your switch friendly app for proper switch
setup and use.
MODES
MODES
MODES
MODES
There are 4 modes that come ready to use on your iPad Wireless Switch Interface, Modes
are used to send different signals to the host computer or tablet, depending on the
computer or tablet and the application being used.
MODE 2
MODE 2
MODE 2
MODE 2:::: PC/MAC
PC/MAC
PC/MAC
PC/MAC UP Arrow, Down Arrow
MODE 3
MODE 3
MODE 3
MODE 3:::: PC/MAC
PC/MAC
PC/MAC
PC/MAC Page Up, Page Down
MODE 4
MODE 4
MODE 4
MODE 4:::: Tablet
Tablet
Tablet
Tablet Multi Media
Multi Media
Multi Media
Multi Media This is for most iOS and Android devices. Play/Pause, Next
Track (e.g. YouTube & iTunes).
MODE 5
MODE 5
MODE 5
MODE 5:::: Assisted Technology
Assisted Technology
Assisted Technology
Assisted Technology Replicates the SPACE/ENTER keys. This is the default mode
of a Wireless Switch Interface.
The following table shows each Mode and respective switch function:
Page
Page
Page
Page 2
2
2
2