EMW XCAN, Руководство пользователя

Страница: 2 / 4

※ Precautions
- Please note that you may get injured when opening the packaging.
- Do not use the product for any purpose other than its intended use.
- Using the product with wet hands may cause injury or electric shock.
- Do not disassemble, repair, or modify this product.
- Do not store the product with metal products such as coins, keys, necklaces, etc.
- Use in a dry place free from moisture and moisture.
- If the product is very hot, please stop using the product.
-
This product is charger for 5W solution and for stable charging, be sure to use the
rated over DC5V / 2.0A adapter.
- Do not place metal objects on the product as this may cause overheating or
malfunction.
- If the position of the receiving coil of the charging target device deviates from the
center of the product, charging may not be performed normally.
- Be careful that children, infants, or animals do not suck or bite the product.
- In the event of malfunction caused by negligence (flooding, breakage or damage) by
the customer, it will be excluded from warranty service.
- We are not responsible for injuries or damages caused by failure to observe the
precautions.
- This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator and your body.
※ Compliance Statement for FCC
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—
Reorient or relocate the receiving antenna.
—
Increase the separation between the equipment and receiver.
—
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.