EBM-B100 User’s Manual www.emw.co.kr
24
Figure 4-17. Manual Setup (Other)
-- RF Power: This item adjusts RF output power. The output gain is shown in the
following table.
RF
Power
0x10
0x18
0x20
0x24
0x28
0x2C
0x30
0x34
0x38
0x3F
Tx Gain
[dBm]
0.8
4.0
6.7
8.0
9.6
11.1
12.6
14.2
15.6
17.5
* An appropriate value is used depending on the installation environment and
distance.
-- Data Rate: The modulation method for data transmission can be changed. In the
case of Binary 3 and 4, the rate decreases, but interference decreases and
transmission distance increases.
-- Schedule Mode: In the case of a 1:1 setting, to achieve the maximum data transfer,
the camera is set as the client and the PC (DVR) as host. In the case of a 1:N setting,
Auto is set for automatic assignment according to the value of N.
* Recommendation: The 1:1 and 1:N Hub settings are the Host and Client. The 1:N
setting is Auto.