EMU 2012 Max, Руководство пользователя, Страница: 8 / 23

Page 8
2/ Remove the bolts and nuts
from the connecting tube
clamp (B). place the
connecting tube into the top
opening (A). Align the bolt
holes.
3/ Slide the two bolts
(1) through the holes
connecting tube and
neck. Twist the bolts,
do not hammer them
through.
4/ Tighten the bolts and nuts
(2) using the 2 allen wrenches
in the tool kit. Also tighten the
small bolts on the outside of
the tube clamp securely (B).
Note some models may have
hex bolts instead.
B