» Steady Cyan: connected to an LTE network.
» Steady blue: connected to a 3G network.
» Steady yellow: connected to a 2G network
» Steadygreen: connected to an Ethernet network.
» Steady red:
- The sim card is not recognised, the PIN has not been entered, or the PIN verification failed.
- Failed to connect to a mobile network or an Ethernet network.
1
» Steady on:
– At least one of the LAN ports is connected to a device.Blinking: data is being transmitted
through a LAN port or the WAN port.
» Off:
– No device is connected to a LAN port.
2
» “On” means that signal strength is available. (More bars means better reception)
» “Off” means that there is no reception. Apply Steps 8- 11 and Search for better spot.
3
SIM card slot
» SIM card slot: Install a standard SIM card to access 4G data connection.
4
External antenna port
»External antenna port: Remove cover and connect external antenna cable.
5
Power button
»Power Button: Press and hold for around 3 seconds to put the modem ON or OFF.
7
LAN port
»The LAN port connects your modem to your computer, switch or other LAN device.
10
LAN4/WAN port
» The LAN/WAN port connects your modem to your computer, switch or other LAN device
» Working as a WAN port when connected to an Ethernet port on the wall.
11
USB port
»The USB port connects a USB device or USB printer to your modem. The modem supports USB
devices up to 32 GB. USB devices with power supply requirements may not work properly.
It is recommended to use an external power supply in this case.
12
Telephone port
»The telephone port connects a telephone set to your modem.
13
14
15
Reset button
This button may be used for trouble shooting. Note that pressing this button will erase
all previous settings.
To reset the modem use a sharp pointed object and press and hold for some 3 seconds until
indicator is blinking. This will restore the modem which will restart automatically.
8
Power port
»The power port connects your adaptor to the power supply.
9
WPS button
»Press and hold for 2 or more seconds until button is blinking to activate WPS connection
when Wi-Fi is turned on.
6
Wi-Fi/WPS indicator
» Steady on: Wi-Fi turned on.
» Blinking: a WPS connection is being set up.
» Off: Wi-Fi turned off.
» On: The modem is powered on.
» Off: The modem is powered off.
LAN/WAN indicator
Signal strength indicator
Network Mode indicator
Power indicator
7. How to fix my LTE connectivity?
Power Adaptor (Not recommended: multi-plug or electrical power socket)
Cable (if cable is properly plug-in the modem)
If connected by Lan/ Wi-Fi (Check SSID* Authentication on device)
*SSID = Name of the Emtel Device, e.g. “Airbox” or “Huawei”
Reset Router (by either Option 1 or 2 below)
Hard Reset > by inserting a pin at the back of the modem (Settings change to default)
Switch On/ Off > by using power button (Settings remain unchanged)
11
