3
Controls & Functions
1.
Stereo Input - accepts stereo line level audio signal input - 1 volt RMS to
microphone.
2.
Loudspeaker Level Input – accepts speaker level signals up to 10 volts RMS
and provides a power load 10 ohms – 10 watts for lowest distortion noise.
3.
Mono RCA, 1/8” Mini & ¼” Phone Auxiliary Line Level Inputs – accepts line
level 1 volt RMS inputs – buffered inputs allow up to six different inputs at
the same time.
4.
Cords Clip – patch cords are clipped to the EJ-8’s box so they won’t get lost.
Clip can be removed to add or subtract patch cords.
5.
Hum Switch – connects the shield ground from inputs to output allowing a
selection for lowest hum pick up.
6.
Volume Control – controls signal volume from Inputs to Microphone Out.
7.
Output Cord to Microphone Input (XLR) – buffered isolated microphone level
signal out to: microphone input jack of the sound system, microphone wall
jack, existing P.A., sound reinforcement system, or house sound system.