Emtec WorkSafe Safe Spacer Скачать руководство пользователя страница 2

SAFETY INSTRUCTIONS

RF EXPOSURE AND INTERFERENCE

The device uses radio signals to connect to wireless 

networks and other devices. It is designed, tested, and 

manufactured to comply with regulations governing radio 

frequency emissions. Even so, radio-signal emitting 

devices can negatively affect the operation of other 

electronic equipment, causing them to malfunction.

POSSIBLE MEDICAL DEVICE INTERFERENCE

The device contains components that emit 

your physician and medical device manufacturer for 

you need to maintain a safe distance of separation 

between your medical device and the device. If you 

suspect the device is interfering with your medical device, 

stop using them immediately and consult your physician.

THE DEVICE  IS NOT A MEDICAL DEVICE

The device is not a medical device and should not be 

used as a substitute for professional medical judgement. 

It is not designed or intended for use in the diagnosis of 

disease or other conditions, or in the cure, mitigation, 

treatment, or prevention of any condition or disease.

NOT FOR USE IN A POTENTIALLY EXPLOSIVE 

ENVIRONMENT

Charging or using the device in any area with a potentially 

explosive atmosphere, such as areas where the air 

particles (such as grain, dust, or metal powders), may be 

hazardous.

Exposing the device to environments having high 

concentrations of industrial chemicals may damage or 

impair the device functionality.

Only trained and competent personnel are permitted to 

inspect, repair and service the device.

Use only original parts and accessories for using 

and maintaining this product. Otherwise, the correct 

functioning of the product could be impaired.   

Please consult the Terms and Conditions at: 

www.emteccorp.com/terms 

for information on 

Replacement Procedures, Obligations of the Buyer and 

Warranties.

are not permitted, as they can endanger your safety or 

damage the device. Disassembling the device may cause 

damage, result in loss of water resistance, and may 

cause injury to the user.

WARRANTIES

SELLER MAKES NO WARRANTY WHATSOEVER 

WITH RESPECT TO THE PRODUCT’S ABILITY TO 

PREVENT, OR REDUCE THE SPREAD OF, ILLNESSES 

OF ANY KIND, INCLUDING BUT NOT LIMITED TO, 

COVID-19 AND/OR ANY ASSOCIATED RESPIRATORY 

DISEASES.

LIMITATION OF LIABILITY

IN NO EVENT SHALL EMTEC CORPORATION LTD BE LIABLE FOR 

ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL, 

SPECIAL, EXEMPLARY, PUNITIVE, OR ENHANCED 

DAMAGES, LOST PROFITS, OR REVENUES OR 

DIMINUTION IN VALUE, ARISING OUT OF, OR 

RELATING TO, OR IN CONNECTION WITH ANY 

BREACH OF THE AGREEMENT (CONSISTING OF 

THE SIGNED PURCHASE ORDER, THE CURRENT 

TERMS AND CONDITIONS AND ANY SCHEDULES 

AND APPENDICES ATTACHED THERETO), 

REGARDLESS OF (A) WHETHER SUCH DAMAGES 

WERE FORESEEABLE, (B) WHETHER OR NOT  EMTEC 

CORPORATION LTD WAS ADVISED OF THE POSSIBILITY 

OF SUCH DAMAGES, (C) THE LEGAL OR EQUITABLE 

THEORY (CONTRACT, TORT OR OTHERWISE) UPON 

WHICH THE CLAIM IS BASED, AND (D) THE FAILURE 

OF ANY AGREED OR OTHER REMEDY OF ITS 

ESSENTIAL PURPOSE.

IN NO EVENT SHALL EMTEC CORPORATION’S AGGREGATE 

LIABILITY ARISING OUT OF OR RELATED TO THE 

USE OF THE DEVICE, WHETHER ARISING OUT OF 

OR RELATED TO BREACH OF CONION TRACT, TORT 

(INCLUDING NEGLIGENCE) OR OTHERWISE, 

EXCEED  THE TOTAL OF THE AMOUNTS PAID BY 

SELLER FOR THE PRODUCTS. 

The Terms and Conditions 

, approved as a condition to the purchase of the 

device, are an integral part of the agreement between 

Emtec Corporation Ltd and a Customer, and apply to all  

Emtec Corporation’s contractual relationships with its Customers 

regarding the device.

By signing the Purchase Order, the Customer explicitly 

acknowledges the content of the Agreement (consisting 

of the signed Purchase Order, the current Terms and 

Conditions and any Schedules and Appendices attached 

thereto).

For more information: 

www.emteccorp.com

Battery safety and disposal

WARNING: The device contains a non-user replaceable 

lithium-ion battery. It should be serviced only by IK 

Multimedia. Don’t incinerate or damage the battery. This 

could cause overheating and injury.

European Union—Disposal Information 

The symbol above means that according to 

local laws and regulations your product and/or 

its battery shall be disposed of separately from 

household waste. When this product reaches its 

end of life, take it to a collection point designated 

by local authorities. The separate collection and 

recycling of your product and/or its battery at 

the time of disposal will help conserve natural 

resources and ensure that it is recycled in a 

manner that protects human health and the 

environment.

Regulatory

P/N: IK141-107 (contains P/N:IK141-100)

Model Nr.: IK141

Contains FCC ID: 2AQ33-DWM1001

Contains IC: 23794-DWM1001

FCC statement

This device complies with Part 15.107 and 15.109 Class 

B of the FCC Rules CFR47: October 2010. 

Operation is subject to the following two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, 

including interference that may cause undesired 

operation.

party responsible for compliance could void the user’s 

authority to operate the equipment.

STG-SSP-0001

Отзывы: