Emtec C=205, Руководство пользователя

Страница: 9 / 14

COMPUTER SYSTEM REQUIREMENT
1. Microsoft Windows 98/Me/2000/XP
2. CD-ROM driver above 2X
3. Pentium CPU above 233MHz
4. With RAM memory above 32MB (if the operating system is Windows XP, the RAM should be above 64MB)
5. Hard disk space should be above 20MB
6. Port USB1.1 or above
7. Connecting to internet (necessary only when the software needs to be firmware upgraded)
The device can be connected to the computer via USB cable as below:
USB CONNECTION
This player is a mass storage device. It does not need driver installation for PC connection.
However for Windows 98 OS, it needs to install the driver. Obtain the Windows 98 driver from
the following website:
www.emtec-international.com
CONNECTED TO THE COMPUTER
Connect mini USB cable
to the USB port of your PC
Note :
It is recommended to power on the unit before connecting to PC.
Important:
Please power on the unit before connecting to PC.
When the device is connected to the computer, LCD will display as below:
Notes :
1)
The device will unlock the power pin when it enters the USB mode (i.e. it will turn off when
the USB cable is unplugged.)
2) Before unplugging the unit from the USB connection with PC, please make sure that
to "safely removed" the device on the windows desktop.
USB cable is connected USB cable can’t be removed
when downloading begins USB cable can be removed
when downloading ends