14
Point-to-Point Wireless Bridge: This mode allows one wireless
bridge communicate with a specific remote one only.
1. Run the “AP Configuration” and make a connection with
your AP.
2. Press “Advanced” button in the right lower Conner of
“Setup”
à
”Wireless LAN”
à
”Operational Settings”, then
you will see a pop-up dialog like this.
3. click on “Point to Point” and fill in the remote MAC address
of the other side of AP in this field.
4. Press “File”
à
”Download Changes” to make all you change
download to AP.
5. On the other side, do as the same, but only the field of
“Remote MAC Address” is that of this side of AP.
6. Make both APs working on the same channel, then you
should have an wireless bridge working now.
