Installing Multiple Cards
Up to 32 cards can be installed in a system providing a maximum of 32 capture channels.
Combinations of all XtremeRGB capture cards in the same machine are supported by the driver.
In order to control the order in which the driver uses the cards, it is recommended when installing
multiple cards that the J5 links on the XtremeRGB-Ex1 are configured. Each card should be
configured as follows:
DirectShow
If you change the link ordering after installation you must run dplinks.exe. This program will update
the existing input names used by the windows DirectShow interface.
To run the dplinks program open the
Run
by clicking on
Start/Run
and type
dplinks
and then
press Enter.
The program will run, however no notifications are displayed.