EMS Vigilant-X, Руководство пользователя

Страница: 31 / 32

31
16/03/2006
Appendix 2 – Screen Order
Screen Order – Connection of Screens
The first card to be initialized generates the picture for the top left monitor in the wall of
screens, plus the three adjacent screens. The second card drives the next four screens and
so on. This sounds simple, but nevertheless, can be confusing when trying to determine how
to assign monitor video cables to the Vigilant-X outputs.
Changing the Order of the Screens
The REG_MULTI_SZ Registry entry
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Ser
vices\DGC123\Device0\ReorderList
can be used to change the order in which the screens
are used. This value can be created and changed using REGEDT32.
By default the screens are used in the order 0, 1, 2 etc. Starting at the top left and
progressing across then down. If you had an eight screen system arranged four across and
two down the screens would be numbered thus:
You do not have to specify the ReorderList value to achieve this arrangement. If you did, the
above arrangement would correspond to a ReorderList of:
0
1
2
3
4
5
6
7
If you wanted to arrange your system so that one Vigilant-X card was driving the left half of
the video wall, and the other Vigilant-X card was driving the right half of the video wall the
screens would be arranged thus:
This arrangement would correspond to a ReorderList of:
0
1
4
5
2
3
6
7