1 Pre Installation
All five circled
fixing positions
are available for
use.
The key hole can
also be used for
locating and
fixing where
required.
2 Components
Part No Product Description
!
Installation must conform to applicable local installation
codes and should only be installed by a fully trained
competent person.
Ensure the RCC is installed as per the site survey.
Refer to step 3 to ensure optimised wireless performance.
If using remote aerials with this product, refer to the Remote
Aerial Installation guide for more information.
6 Fix to the Wall
4 Optional PCB Removal
5 Remove Cable Entry Points
Drill the cable entry
points as necessary.
Radio Clust
er Communica
tor
POWER
FAULT
1
2
3
4
5
= Do Not Use
= Available Cable
Entry Points
3 Mounting Location Guidelines
POWER
FAULT
0.6m
2m
Power
Supply
RCC
24Vdc Radio Cluster Communicator (RCC)
Installation Guide
RADIO CLUSTER COMMUNICATOR
POWER
FAULT
FC-555-024
FC-555-324
24Vdc Powered RCC
24Vdc RCC c/w remote aerial facility
Ensure the RCC is not installed
within 2m of other wireless or
electrical equipment.
The RCC must not be installed
within 0.6m of any metal work.
Note: the above points exclude
the power supply, provided it is
mounted below the RCC as
shown.
Remove the three circled retaining screws, before unclipping
the PCB.
RESET
LOGON
BACK
HEALTHY
FAULT
SYS FAULT
RF1
RF2
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
SENSITIVE
For optimum wireless
p e r f o r m a n c e , t h e
following must be
observed:
4x Corner Covers
4x Lid Screws
1x RCC Lid
1x RCC PCB
1x RCC Box
1
2
3
4
5
©2018 EMS Ltd. All rights reserved Page 1 of 2 TSD054 Iss 8 05/09/2018 AJM
