Emprex LM-2202, Руководство пользователя

Страница: 13 / 14

4.The side effect of the Monitor Life-Extension function (why not
preset Advanced Power Saving Mode as default?)
According to the request of EPA (U S Environmental Protection Agency) to power
management of monitors, the power consumption of the monitor must go down to below
3 watts within 3 seconds after the monitor steps in power saving mode. But the
L ife-Extension function decreases the electricity supplied to the back lights of L CD
monitor gradually. Therefore, the M onitor L ife-Extension function has conflict with the
requirement of EPA in the first 7 minutes after entering sleeping mode. Even
though,comparing the advantages of both conditions, we still recommend you strongly
to set your monitor in Advanced Power S aving mode.
5. l How to engage the Monitor Life-Extension function?
You may simply use the OSD control to activate the Monitor
Life-Extension function.
- 10 -
1. Press arbitrarily 4 buttons (other than the Power S witch) on the left to activate the
OS D menu.
2. Press button to enter function menu.
3. Press or button to select system .
4. Press to confirm the selection.
5. Press or button to select POW ER S AVING M OD E .
6. Press to confirm the selection.
7 . Press or button to select the advanced option in the POW ER S AVING
M OD E functions.
8 . Press to confirm the selection.
9 . Press button to exit the higher level menu.
10 . Press the button to exit the OS D menu.
<
<
<
<
<
OK
OK
<
<
OK