Reconnect any cables that were removed earlier.
Connect your monitor's cable to the graphics board
connector, as shown in the right figure.
Replace the screw to fasten the card the card into
the chassis, and replace the computer chassis
cover.
Grasp the edge or bracket of the card, align your card
with an empty graphic card expansion slot and slide it
into place.
Note the notched edge on the board. This corresponds to
a connector lock on the graphic card slot. Disengage the
lock and install the graphics board into the graphic card
slot. Be careful not to damage the pins in the connector.
Use firm pressure to seat the card.
Power on the system and the monitor then wait until
Windows loads. If the
Found New Hardware
screen is displayed as the system detects the newly
installed graphics card or USB remote control
receiver, click
[Cancel]
.
If the
Found New Hardware
screen is displayed as
the system detects the
WDM
drivers, click
[Next]
,
then click
[Finish]
and restart the computer.
Note:
All the hardware must be installed prior to installation of software. See the previous
section if you have not installed the hardware.
Insert the Driver CD into your CD/DVD-ROM drive. The CD will auto-run and bring up a menu of
options. If the CD does not auto-run, please click
[Start]
’
[My Computer]
’
[CD-ROM drive]
.
Click
[Install Graphics Card Driver]
to enter Installshield Wizard screen.
Click
[Next]
to start the installation process.
Select
[Yes, I want to restart computer now]
, and click
[Finish]
.
Installing Graphics Card Driver
Graphics Card
Slot
•
Click
[DIRECTX 9.0c]
.
•
Select
[I accept the agreement]
then Click
[Next]
.
•
Click
[Next]
.
•
Click
[Finish]
to restart the computer.
•
Click
[Photo Album SE]
.
•
Click
[Next]
.
•
Choose a license agreement language then click
[Next]
.
•
Click
[Yes]
to express the acceptance of the license agreement. .
•
Click
[Next]
.
•
Select
[Yes, I want to restart computer now]
, and click
[Finish]
to restart the computer.
Installing DIRECTX 9.0c
Installing Photo Album SE
Desktop Access
Right click from your Windows desktop to open the desktop
menu. Choose
NVIDIA Display
.
Windows Taskbar Access
Windows Display Properties Setting Access
Right click from your Windows desktop to open the desktop menu.
Click
Properties
’
Settings tab
’
Advanced
’
GeForce GPU tab
to open NVIDIA Setting Menu.
Click
[NVIDIA Settings
icon]
’
[Analog Display]
to access the
NVIDIA
Settings Menu
.