Modes 11 & 12 - FX Loop
Mode 11 (boost at amp input)
This mode allows you to buffer an effects chain in front of your
amp, as well as in the amp's fx loop.
When the
stomp function
toggle is set to
boost
, the fx loop is
always engaged and the boost can be toggled on/off with the stomp
switch. The boost is applied to the amp's input.
When the
stomp function
toggle is set to
AY
, in the A state, the
amp fx loop is bypassed. In the Y state, the amp fx loop is engaged.
notes:
- In order to avoid ground loops, the effects connected to
loop out 1
must return to
loop in 2
and be sent from
out 2
into the amplifiers
input. The amp's fx send will then go into
in 2
and out of
loop out 2
to the fx loop effects chain. From there you'll come back in
loop in 1
and then send
out 1
to the amplifiers fx return.
Содержание buffer plus
Страница 1: ...user manual...
