Empower CIS334A, Инструкция по эксплуатации

Страница: 10 / 14

9
VARIABLE SPEED
You can vary the spindle rotation speed by changing the pressure on the trigger.
ROTATION DIRECTION (SEE FIG.4)
Your tool is equipped with a 3-position switch (forward / self-lock /
reverse ) through the housing above the trigger.
When the knob is pushed toward the right, the rotation is forward
(clockwise).
When pushed from right to left, the rotation is reversed
(counterclockwise).
When in center self-lock position, it is locked into stop and the
trigger is locked.
Do not push the rotation direction knob until the drive stops turning.
LED WORKING LIGHT
The impact driver has 3 LED lights to illuminate the work area and
improve vision when working in areas with insufficient light.
The LED light will be turned on or off accompanied by situation of the trigger
switch.
Keep the tool clean by using a soft damp (not wet) cloth. Do not use
solvents on the plastic parts.
Lubrication is not necessary. After long-term use, find an authorized
service center to maintain and lubricate the tool.
To maintain the best performance of your rechargeable battery, protect it
from overheating and overcharging. Occasionally charger the battery for 6
hours. The battery may also benefit from a full discharge from time to time.
OPERATING PROCEDURES
MAINTENANCE