Empower CDS326, Инструкция по эксплуатации

Страница: 3 / 18

2
IMPORTANT SAFETY INSTRUCTIONS
WORK AREA

Keep your work area clean and well lit. Cluttered benches and dark
areas invite accidents.

Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases, or dust. Power tools
create sparks which may ignite the dust or fumes.

Keep bystanders, children, and visitors away while operating a
power tool.

Distractions can cause you to lose control. Protect others in the
work area from debris such as chips and sparks. Provide barriers or
shields as needed.
ELECTRICAL SAFETY

Double insulated tools are equipped with a polarized plug. This
power plug will fit in a polarized outlet only one way. If the plug does
not fit fully in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double Insulation eliminates the
need for the three-wire grounded power cord and grounded power
supply system.

Avoid body contact with grounded surfaces such as pipes,
radiators, ranges, and refrigerators. There is an increased risk of
electric shock if your body is grounded.

Do not expose power tools to rain or wet conditions. Water entering
a power tool will increase the risk of electric shock.

Handle the cord carefully. Never use the cord to carry the tools or
pull the plug from an outlet. Keep cord away from heat, oil, sharp
edges, or moving parts. Replace damaged cords immediately.
Damaged cords increase the risk of electric shock.

When operating a power tool outside, use outdoor extensions cord
marked “W-A” or “W”. These cords are rated for outdoor use and
reduce the risk of electric shock.