Empisal Designer 800 Скачать руководство пользователя страница 33 | Manualshive

Страница: 33 / 37

Empisal Designer 800 Скачать руководство пользователя страница 33

30

Caution:

Always make sure that the machine is unplugged from

power source and the main switch is on

"0"

before inserting

or removing any parts and before cleaning.

Remove the stitch plate:

Turn the hand wheel until the needle is fully raised. Open
the hinged front cover and unscrew the needle plate screw
with the screw driver. (1)

Cleaning the feed dog:

Remove the bobbin case and use the brush supplied to

clean the whole area. (2)

Cleaning and lubricating the hook:

Remove the bobbin case. Snap the two hook retaining

arms  (a)  outwards.  Remove  the  hook  race  cover  (b)  and
the  hook  (c)  and  clean  with  a  soft  cloth.  Lubricate  at  the
points  (d)  (1-2  drops)  with  sewing  machine  oil.  Turn  the
hand wheel until the hook race

(e) is in the left position. Replace the hook (c).
Replace the hook race cover and snap back the two hook

retaining arms. Insert the bobbin case and bobbin and
replace the stitch plate.

Important:

Fabric fluff and threads must be removed

regularly. Your machine should be serviced at regular
intervals at one of our service agencies.

Maintenance

«
...
31
32
33
34
35
...
»

Содержание Designer 800






































Отзывы:

Нет отзывов