WORKING INSTRUCTIONS
1.
Connect the L speaker
2.
Connect the audio source with the audio input
3.
Adjust the volume to minimum
4.
Turn the system ON
5.
Select the preferred input and adjust the volume as you like
SPECIFICATIONS
l
Total power RMS: 60W (1kHz -‐ THD ≤ 1%
）
l
Frequency respose:60Hz-‐20kHz
l
Signal to Noise Ratio: ≥85dB
l
Sensitivity: 680mV 1000Hz
l
Driver: 5" 4Ω + 1" 5Ω
l
Size (HxWxD in mm): 288 x 205 x 248
l
Controls: Volume, Bass, Treble
l
Power : ~220V / 50Hz
TROUBLESHOOTING GUIDE
o
Sound from only one speaker
•
Please ensure all speaker cable connections are correct, the speakers should be connected with stereo
cable.
•
Please try an alternate sound source such as a CD player, MP3 or other player, if both speakers now
work correctly, the original sound source is at fault. Please ensure the computer Soundcard is
installed correctly.
o
When listening to a CD played by the computer,I hear the sound from only one speaker
•
This often happens with new computers-‐when listening to a CD played by the computer, you hear
the sound from only one speaker, but both speakers work if you listen to a WAV file or when you
play a videogame. This happens because the CD-‐ROM drive is not connected correctly to the
soundcard, or one of the cables is under short circuit. Please refer to the CD-‐ROM drive user
manual to fix this jumper issue.
o
No sound from any of the speakers
•
Please ensure AC adapter is plugged in and power outlet is switched on.
•
Please ensure all audio cable connections are correct.
•
Please ensure that the volume is not to minimum
•
Please ensure sound source equipment is working correctly.
