EMPIRE EARS AUDIO GUIDE (CONT.)
LISTEN RESPONSIBLY
HOW TO ATTACH
HOW TO DETACH
HOW TO CARE
ATTACHING & DETACHING CABLE
CLEANING
Locate the sound bores at the end
of the canal on your IEM. Using the
loop side of cleaning tool, point
your IEM downwards, and begin to
scoop out any internal debris.
POLISHING
Use only microfiber cloths or non-
alcoholic wipes to clean the shell.
Never submerge IEM in liquids.
SCRUBBING
Debris will begin to surface and
may leave particles in surrounding
areas. Use the brush end of the
tool to scrub off any remaining
debris.
STEP 1
Match the right ear with the right cable (red dot).
STEP 2
Insert the cable by sliding it until it feels
snug. The colored dot on top of the
connector should always point upwards.
This indicates that the positive and negative
are inserted correctly.
STEP 3
Follow same process for left side (blue dot).
WRAP & STORE
Cinch the cable all the way up,
then loosely wrap it around your
four fingers. Carefully store your
neatly wrapped Empire IEMS inside
your carrying case.
Sound
Pressure Level
DB(A)
Permissable Noise
Exposure Duration
(Per Day)
90
8 hrs
95
4 hrs
100
2 hrs
105
1 hrs
110
30 min
Source
SPL (dBA)
Faintest Audible Sound
0
Whisper
20
Quiet Residence
30
Soft Stereo in Residence
40
Speech Range
50-70
Cafeteria
80
Pneumatic Jackhammer
90
Loud Crowd Noise
100
Accelerating Motorcycle
100
Rock Concert
120
Jet Engine
(75 Feet away)
140
HOW TO INSTALL TIPS
To install tips, slide your selected tip
over the nozzle until it feels snug.
To remove, gently twist and pull
from nozzle.
Grasp the base of cable by port and gently pull
outward while wiggling back and forth in an up
and down motion.
DO NOT attempt to remove by pulling on the
cable or you might damage the cable port and
device.
Inserting The final Audio Type E Tips
All of our custom IEMS use recessed sockets. When using an aftermarket
cable, please ensure that it’s designed for a recessive socket. If not, you
risk damaging your device, if it doesn’t securely fit.
