33742-1-0614
Page 17
33742-1-0614
Page 16
Keep the control compartment, logs and burner area surrounding
the logs clean by vacuuming or brushing area at least twice a year.
THE LOGS CAN GET VERY HOT – HANDLE ONLY WHEN COOL.
Always turn off gas to the pilot before cleaning. For relighting, refer
to lighting instructions located on the log set.
Never obstruct the flow of the combustion and ventilation air. Keep
the front of the firebox clear of all obstacles and materials.
Screens must be closed during operation.
JUNcTION BOX wIRING INSTALLATION INSTRUcTIONS
MAINTENANcE
To Order Parts Under Warranty, please contact your local Empire dealer. See the dealer locator at www.empirecomfort.
com. To provide warranty service, your dealer will need your name and address, purchase date and serial number, and the
nature of the problem with the unit.
To Order Parts After the Warranty Period, please contact your dealer or one of the Master Parts Distributors listed below.
This list changes from time to time. For the current list, please click on the Master Parts button at www.empirecomfort.com.
Please note: Master Parts Distributors are independent businesses that stock the most commonly ordered Original
Equipment repair parts for Heaters, Grills, and Fireplaces manufactured by Empire Comfort Systems Inc.
MASTER PARTS DISTRIBUTOR LIST
Parts Not Under warranty
Parts can be ordered through your Service Person, Dealer, or a Master Parts Distributor. See this page for the Master Parts Distribu
-
tors list. For best results, the
service person or dealer
should order parts through the distributor. Parts can be shipped directly to the
service person/dealer
.
warranty Parts
Warranty parts will need a proof of purchase and can be ordered by your Service Person or Dealer. Proof of purchase is
required
for
warranty parts.
All parts listed in the Parts List have a Part Number. When ordering parts, first obtain the Model Number and Serial Number from the
name plate on your equipment. Then determine the Part Number (
not
the Index Number) and the Description of each part from the fol
-
lowing illustration and part list. Be sure to give all this information . . .
Appliance Model Number
Part Description
Appliance Serial Number
Part Number
Type of Gas (Propane or Natural)
Do not order bolts, screws, washers or nuts. They are standard hardware items and can be purchased at any local hardware store.
Shipments contingent upon strikes, fires and all causes beyond our control.
hOw TO ORDER REPAIR PARTS
Dey Distributing
1401 Willow Lake Boulevard
Vadnais Heights, MN 55101
Phone:
651-490-9191
Toll Free:
800-397-1339
Website:
www.deydistributing.com
Parts: heater, hearth and Grills
Victor Division of F. W. Webb Company
200 Locust Street
Hartford, CT 06114
Phone:
860-722-2433
Toll Free:
800-243-9360
Fax:
860-293-0479
Toll Free Fax:
800-274-2004
Websites:
www.fwwebb.com & www.victormfg.com
Parts: heater, hearth and Grills
East coast Energy Products
10 East Route 36
West Long Branch, NJ 07764
Phone:
732-870-8809
Toll Free:
800-755-8809
Fax:
732-870-8811
Website:
www.eastcoastenergy.com
Parts: heater, hearth and Grills
Able Distributors
2501 North Central Avenue
Chicago, IL 60639
Phone:
773-889-5555
Toll Free:
800-880-2253
Fax:
773-466-1118
Website: www. abledistributors.com
Parts: heater
cAUTION: ALL wIRING ShOULD BE DONE By A QUALIFIED
ELEcTRIcIAN AND ShALL BE IN cOMPLIANcE wITh ALL
LOcAL, cITy AND STATE BUILDING cODES. BEFORE MAKING
ThE ELEcTRIcAL cONNEcTION, MAKE SURE ThAT MAIN
POwER SUPPLy IS DIScONNEcTED. ThE APPLIANcE,
whEN INSTALLED, MUST BE ELEcTRIcALLy GROUNDED IN
AccORDANcE wITh LOcAL cODES OR, IN ThE ABSENcE
OF LOcAL cODES, wITh ThE NATIONAL ELEcTRIcAL cODE
ANSI/NFPA 70 (LATEST EDITION)
A factory installed junction box is located on the lower right hand side
of the firebox. Wiring must be fed to the junction box and attached
to the receptacle that is provided. Remove the knockout in the
installed junction box to accept wiring into the junction box. Install
a UL listed cable clamp (not supplied) in the knockout hole. Leave
approximately 6 inches of wire in the junction box for connection.
Attach black wire to one side of the receptacle and white wire to
opposite side of receptacle. The ground wire should be attached
to the green (neutral) screw.
Install the receptacle into the junction box. Attach cover plate.
Figure 29