background image

40390-0-0119

Page 11

Annual inspection and cleaning by the dealer or qualified service 

technician is recommended to prevent malfunction.

TURN OFF FIREPLACE AND ALLOW TO COOL BEFORE 

CLEANING.

Remove any optional decorative covers or decorative glass 

material. Gloves are recommended.

PERIOdIC CLEANING - Refer to parts diagram for location of 

items discussed below.

• 

Do not use cleaning fluid to clean any part of fireplace.

• 

Clean glass with ammonia-free cleaner. Ammonia will etch 

or stain glass when heated. (We recommend gas fireplace 

glass cleaner.)

• 

Remove loose particles and dust from the burner, controls 

and air shutter.

• 

Inspect and clean burner air intake hole. Remove lint or 

particles with brush. Failure to keep air intake hole clean will 

result in sooting and poor combustion.

ANNUAL CLEANING/INSPECTION - Refer to parts diagram 

for location of items discussed below.

• 

Inspect and clean burner air intake hole. Remove lint or 

particles with vacuum or brush. Failure to keep air intake 

hole clean will result in sooting and poor combustion.

• 

Inspect and clean all burner ports.

• 

Inspect ODS pilot for operation and accumulation of lint at air 

intake holes.

• 

Verify flame pattern for proper operation.

• 

Verify smooth and responsive ignition of main burner.

PILOT MAINTENANCE ANd CLEANING

Oxygen depletion Sensor Pilot

When the pilot has a large yellow tip flame, clean the Oxygen 

Depletion Sensor as follows:
1.  Use canned air to blow through hole A. 

See Figure 22.

 

 

This will blow out foreign materials such as dust, lint and 

spider webs.

C

B

A

INTERMITTENT PILOT

Figure 22

WARNING

Never use needles, wires, or similar cylindrical objects to 

clean the pilot to avoid damaging the calibrated ruby that 

controls the gas flow.

2.  If intermittent pilot fireplace stops working, clean flame 

sensor B 

Figure 22

 with a damp cloth.

3.  If intermittent pilot ignitor does not spark, clean ignitor C 

Figure 22

 with a damp cloth.

CONTROL COMPARTMENT ANd BURNER MAINTENANCE

Keep the control compartment and burner area clean by 

vacuuming or brushing area at least twice a year.

WARNING

The fireplace can get very hot. Handle only when cool.

Always turn off gas to the pilot before cleaning. For relighting, 

refer to lighting instructions located on the rating plate.

Never obstruct the flow of the combustion and ventilation air. 

Keep the front of the fireplace clear of all obstacles.

BATTERY REPLACEMENT

An intermittent pilot may require more frequent battery changes. 

To replace the batteries, follow these steps:

1.  Remove the cover from the electrical box on the wall.

2.  Replace the batteries inside the box.

3.  Replace the cover using four (4) #4 x 1/2 Phillips screws.

REMOTE

SWITCH

LED SWITCH

ON-OFF

LED SWITCH

COLOR MODE

COVER PLATE

Figure 23

CLEANING ANd SERVICE

Содержание VFLB60FP90N













Отзывы: