30259-6-0314
Page 34
7. Place the Front Right Log (E) in the right front corner of fire
-
box. It should fit snug into the corner. See Figure 61.
E
A
B
D
C
Figure 61
8. Place the Top Right Log (G) onto the pins on (B), (D) and (E)
Logs. The “legs” of (G) Log will rest on (D) and (E) Logs. The
pins must fit into the holes in the bottom of (G) Log to ensure
proper alignment of (B), (D) and (E) Logs. See Figure 62.
9. Place the Top Left Log (F) onto the pins on (A) and (D) Logs.
The “legs” of (F) Log will rest on (D) Log. The pins must fit into
the holes in the bottom of (F) Log to ensure proper alignment
of (A) and (D) Logs. See Figure 5.
F
G
A
B
D
C
E
Figure 62
10. Verify that the Rear Logs (A) and (B) are still against the back
of the firebox.
11. Verify that the logs are not in contact with the flame sensor.
Interference with the flame sensor will effect the operation.
12. Place the door assembly on the fireplace and secure with the
main door latches located on the right and left sides of the
fireplace.
13. Close the left and right panels.
14. Reattach the top panel.
15. The installation of the log set is complete.
BAY WINDOW MANTIS LOG SET INSTALLATION INSTRUCTIONS
REAR LEFT LOG (A)
TOP RIGHT LOG (G)
FRONT RIGHT LOG (E)
CENTER LOG (D)
FRONT LEFT LOG (C)
TOP LEFT LOG (F)
REAR RIGHT LOG (B)
Log Assembly
Figure 63