background image

41380-0-0120

Page 59

IMPORTANT SAFETY INFORMATION

WARNING

Read and follow these safety precautions prior to operat-

ing this appliance. Failure to follow these precautions may 

result in death, injury, or property damage.

Do not operate this appliance without the glass door 

installed.

WARNING

Do not operate this fireplace insert with glass doors closed.

• 

Do not use this appliance if any part has been under water. 

Immediately call a qualified service technician to inspect the 

appliance and to replace any part of the control system and 

any gas control which has been under water.

• 

In the event of a natural disaster (tornado, earthquake, 

fire, etc.) have a qualified technician inspect the heater for 

damage or potential gas leaks. 

• 

Alert people – and especially children – to the hazards of 

high surface temperatures. This heater may become hot 

enough to burn skin and ignite clothing after prolonged 

contact. To prevent injury, caution people to stay clear and 

avoid touching the heater. 

• 

Carefully supervise young children when they are in the 

same room as the fireplace insert. Toddlers, young children, 

and others may be susceptible to accidental contract burns. 

A physical barrier is recommended if there are at-risk 

individuals in the house. To restrictor access to a fireplace 

or stove, install an adjustable safety gate to keep toddlers, 

young children, and other at-risk individuals out of the room 

and away from hot surfaces.

• 

The vent cap located on the outside of your home, will 

become very hot. Alert everyone, adults and children, to stay 

clear and avoid touching the vent cap. Keep the area around 

the vent cap clear of combustibles, including shrubs and 

trees. 

• 

Replace any safety screen, guard, or barrier removed to 

service the fireplace insert prior to operating the appliance.

• 

Replace a damaged barrier with one tested and approved for 

this fireplace insert. 

• 

A barrier designed to reduce the risk of burns from the hot 

viewing glass is provided with this appliance and must 

be installed for the protection of children and other at-risk 

individuals.

• 

Do not place clothing or other flammable materials (solids, 

vapors or liquids) on or near the appliance.

• 

This fireplace insert requires an unimpeded flow of air 

to circulate warm air. Do not place objects on or around 

the fireplace insert that may restrict air flow to or from the 

fireplace insert. 

Содержание DVC26IN71

































































Отзывы: