Empi EasyWear, Инструкция по использованию и уходу

Страница: 4 / 8

Safe Use
Product Information
In general, electrical stimulation should be used in the management
of specific conditions only under medical supervision.
The following information is contained in this section:
• Maintenance • Precautions
• Cleaning • Dangers
• Warnings • Adverse Effects
Read, understand and practice the precautionary and operating instructions
found in this manual. Observe any and all precautionary and operational decals
placed on the unit.
Maintenance
Check the Conductive Wrap before each use
for signs of wear and/or damage. Replace
electrodes and lead wires as required.
Cleaning
Cleaning the Conductive Wrap
– Use a damp cloth moistened with mild soap
and water to clean the exterior of the device. Use of other cleaning solutions
may damage the wrap. Never immerse the wrap in water or other liquids.
Do not use cleaning fluids or solvents to remove stains or dirt. These liquids
may damage the wrap.
Cleaning the Lead Wires – Periodically wipe the lead wires clean with a cloth
dampened with a mild soap solution, then gently wipe them dry. Use of rubbing
alcohol on the lead wires will damage the insulation and dramatically shorten
their life.
Cleaning the Electrodes
– Washing should be done by hand with a mild
detergent and air dried. Never place in a drying machine and do not use bleach.