Empertech DULCET Series, Руководство пользователя

Страница: 25 / 36

Front panel instruction:
①
LCD monitor——for displaying the operation information of the main frame.
②
POWER——Power indicator
③
ACTIVE——signal indicator, flashing when the mainframe is sending code or
receiving signal
④
1~6——Corresponding to the signal channels of cameras 1 to 6, in combination
with
△/
SAVE
,▽/
RECALL for appointing the corresponding address codes of high
speed camera under control
⑤ △/
SAVE
▽/
RECALL——use in combination with key 1 to 6, for storing and
recalling the preset position of high-speed camera.
Rear panel instruction:
①
VIDEO INPUTS ——Connect to the video signal input of 6 ways of camera video
signal.
②
VIDEO OUTPUTS ——Output RCA, BNC and VGA---3 ways of camera video
signal.
③
CAMERA NET——For the control over high-speed camera RS485.
④
KEY BOARD——For connecting to the control keyboard of high
⑤
CODE ——Switch of protocol and baud rate setting
（
Not support the protocols of
other manufacturers so far
）
⑥
CONFERENCE SYSTEM ——Connect to conference control mainframe.
21
for displaying the operation information of the main frame.
signal indicator, flashing when the mainframe is sending code or
orresponding to the signal channels of cameras 1 to 6, in combination
RECALL for appointing the corresponding address codes of high-
with key 1 to 6, for storing and
Connect to the video signal input of 6 ways of camera video
3 ways of camera video
speed camera RS485.
For connecting to the control keyboard of high-speed camera.
Not support the protocols of
ct to conference control mainframe.