8
INSTALLATION
Before using your gas rice cooker, be sure to install the following two parts on the rice cooker:
Rear Connector
Gas Connector
1. Fasten the rear connector into the gas valve. (Fig. 1)
2. Fasten the gas regulator into the rear connector. Be sure to follow the direction of the arrow.
(Fig. 2-3)
3. Double check both the rear connector and the gas regulator to be sure they are locked in place.
To prevent air leakage, you can cover this joint with electrical tape if necessary. (Fig. 4)
To install the regulator for 478EGRC140NG and 478EGRC140NG:
1. Fasten the gas regulator into the rear connector. Be sure to follow the direction of the arrow.
(Fig. 1)
2. Double check both the rear connector and the gas regulator to be sure they are locked in place.
To prevent air leakage, you can cover this joint with electrical tape if necessary. (Fig. 2)
Fig.
1
Fig.
2
Fig.
3
Fig.
4
Fig.
1
Fig.
2
RiceCookers_Manual.indd 8
1/3/22 8:10 AM
