Emperor CWT-5500, Руководство пользователя

Страница: 5 / 6

Connections/setting up
3
6
Connections/setting up
Installing /
Removing Batteries:
Monitor-
1. Remove the battery cover as
shown below.
2. Insert (or remove) the 10 size
"C" batteries as below.
Note: Install batteries as shown
by the battery compartment
marking only..
AC Adaptor Use:
Make sure that proper AC adaptors
have been installed correctly. Use
only the AC adaptors supplied with
the Monitor.
1. Install the plug of the AC
Adaptor to the DC jack of
the unit.
2. Plug the adaptor into a
standard wall outlet.
3. Switch on the power switch
of the unit.
4. The power indicator will be
illuminated.
Channel & Timer Setting
Sw5
Sw6
ON
ON
OFF
ON
OFF
OFF
ON
OFF
Switcher
time
3sec 5sec
7sec 10sec
1.The channel & Timer selector on the REAR cabinet used
for channel & timing setting .put the switch to on position,
than you can select single channel 1-4 or any other channel
combination.
2.Timer setting defaut as below.
CH
TIMER