background image

 

 

HOCK, 

E. 

AUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE 

TTENTION: POUR EVITER LES CHOCS ELECTRIQUES, 

To prevent electric shock, do not use this polarized plug with an extension 
cord, receptacle or other outlet unless the blades can be fully inserted to 
prevent blade exposure.  

 
Pour preevenir les chocs electriques ne pas utiliser cette fiche polarises avec un 

prolongateur, un prise de courant ou une autre sortie de courant, sauf si les lames peuvent titre inserees 
a fond sans laisser aucune parIIIe a decouvert.  
 
Grounding or Polarization — Precautions should be taken so that the grounding or polarization means of 
the component is not defeated.  
 
This apparatus does not exceed the Class A /Class B (whichever is applicable) limits for radio noise 
emissions from digital apparatus as set out in the radio interference regulations of the Canadian 
Department of Communications.  
 
ATTENTION — Le present appareil numerique n’emet pas de bruits radioelectriques depassant las 
limites applicables aux appareils numeriques de classA/de class B (selon le cas) prescrites dans le 
reglement sur le brouillage radioelectrique edicts par les ministere des communications du Canada.  
 
For questions regarding service, please contact: 
 
EMOTIVA Toll Free – (877) EMO-TECH 
www.emotivaaudio.com 
 
 

WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC S
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTUR

 
C
OF PLUG TO WIDE SLOT, FULLY INSERT.  
 
A
INTRODUIRE LA LAME LA PLUS LARGE DE L  

 
 
 
 
 
 
 
 

 
 
 
 
 
 

 

Содержание Ultra UPA-7




























Отзывы: